How to vent a portable AC through a UK sash window

A portable air conditioner must push its hot air outside, and a vent panel fitted into the sash is the simplest way to do it. Seal every gap around the panel and hose, because leaks let hot air straight back in and make the unit work harder. Take the panel out when you are not using it.
Quick Overview
Venting a portable air conditioner through a traditional UK sash window is easier than you think. By installing a simple vent panel and sealing the window around it, you can direct hot exhaust air outside in just a couple of steps—no bulky brackets or permanent modifications required.
What You’ll Need
- Portable AC unit with a flexible exhaust hose
- Sash window vent kit (or a DIY panel made from plywood or MDF)
- Foam weather‑stripping tape
- Silicone sealant (optional, for extra weather‑proofing)
- Measuring tape and pen/pencil
- Screwdriver or drill (if your kit uses screws)
See our recommended portable air conditioners
Step‑by‑Step Installation
- Measure the hose diameter – Most portable units use a 4‑inch (10 cm) hose.
- Mark the opening – Open the sash window fully and measure a rectangular cut‑out that matches the hose size plus a ½‑inch clearance on each side.
- Cut the vent panel – If using a ready‑made kit, skip this step. For a DIY panel, cut the plywood to the marked dimensions and drill a hole just large enough for the hose to pass through snugly.
- Fit the panel into the window – Slide the panel into the sash opening. The window’s lower sash should sit flush against the panel, creating a tight seal.
- Seal the edges – Apply foam weather‑stripping around the panel’s perimeter and press the window sash against it. Add a thin bead of silicone sealant if you want a more permanent seal.
- Connect the hose – Insert the exhaust hose through the panel hole and secure it with the supplied clamp.
- Test the setup – Turn the AC on and check for any air leaks around the panel. Adjust the weather‑stripping as needed.
Tips for a Secure Fit
- Use a double‑glazed sash – It provides better insulation and reduces condensation.
- Check local building regulations – Most UK homes allow temporary venting, but it’s worth confirming if you’re renting.
- Remove the panel when not in use – This keeps the window functional and prevents draughts in colder months.
By following these steps, you’ll have a clean, efficient vent for your portable air conditioner, keeping your home comfortable without compromising the classic look of your sash windows.
Related guide: not sure which size of unit your room needs? Read What size portable air conditioner do I need? UK room-size guide.
Sources
- Energy Saving Trust – How to keep your home cool in hot weather – choosing the right size unit, checking there are no gaps where the exhaust pipe leaves the window, and keeping internal doors closed while it runs
- GOV.UK – Beat the heat: staying safe in hot weather – general advice on keeping your home cool in a heatwave
Last reviewed: 15 October 2026